- Sales Manager: Manager Zhu
- Sales Hotline: 13718739688 (Beijing)
- Phone: 18351045119 (Yangzhou)
- Fax: 18351045119
- Email: firstname.lastname@example.org
- Address of Company: Putou Industrial Zone, Jiangdu, Yangzhou City, Jiangsu Province
- Bao'an Fire Box Factory talk about fire equipment installation ...
- Baoan Fire Fighting teaches you how to identify fire box ...
- How to use fire boxes more safely
- Fire box manufacturers analyze the maintenance methods of fire box ...
- How to buy fire equipment?
- Summer hot weather is approaching ...
- Use experimental methods to tell you why ...
- Baoan fire box manufacturers teach you how to check and eliminate ...
Six points to pay attention to when maintaining fire extinguishers
- Author: xiaofangyuan
- Release time: 2019-09-04 19:46:09
- News browsing popularity: Times
Yangzhou Baoan Fire Fighting Equipment Co., Ltd. produces "Qionghua" brand series of products: fire box , stainless steel fire box , fire hydrant box , rolling fire box , water film fire box , lined fire hose series products, indoor fire hydrant Pressure-reducing and pressure-stabilizing series, fire water gun, interface series products, fire emergency light series and fire alarm button, fire hose series products, etc.
You are welcome to inquire and order the products you need. 24-hour service phone: 18351045119 13718739688.
Nowadays, with the continuous improvement of people's safety awareness, people pay more and more attention to Shandong fire equipment, especially fire extinguishers, which are becoming more and more common in daily life. So how much do you know about it? Know what points need attention when maintaining a fire extinguisher? Next, the fire box manufacturer Baoan Fire Fighting takes everyone to find out below. Fire extinguisher 1. The ambient temperature of the fire extinguisher hanging place is -10 ℃ ~ 55 ℃. 2. The location of the fire extinguisher should be obvious, easy to access, and does not affect the safe evacuation. The passage between the cart fire extinguisher and the object to be protected should be unobstructed. 3. The fire extinguisher should be installed in a ventilated, dry and clean place. It should not be exposed to the hot sun. It should not be close to the heat source or subject to severe vibration. 4. Perform regular inspection and maintenance on time: check once a quarter for nozzles and spray pipes for blockage, corrosion damage, and whether the rigidly connected nozzle can turn its axis and stay at any position. Whether the organization is flexible and whether there are inspection marks. After the inspection, sign the fire extinguisher inspection card. 5. Check the fire extinguisher frequently. The inspection contents are as follows: (1) Whether the pointer of the pressure gauge is in the green area (if the reason is to be checked in the red area, it should be refilled after the check). (2) Whether the nozzle is unblocked (if blocked, it should be cleared in time). (3) Whether the seal is intact (once it is opened, it needs to be refilled in accordance with regulations, and a seal test is performed to re-seal it). (4) Whether the parts are complete (with or without looseness, deformation, corrosion, or damage). Whether the anticorrosive layer of the visible part of the fire extinguisher (5) is intact (it should be repaired in time if it is slightly dropped, and the obvious corrosion should be sent to a professional department for maintenance and pressure test). 6. Fire extinguishers are filled by professional companies approved by the fire department. The above are the six main points for the fire extinguisher maintenance fire extinguisher introduced by Baoan Firefighting, a fire box manufacturer. I hope that the above content can be helpful to everyone. It is recommended that you regularly perform maintenance on it and try to extend its service life. Our products are of interest, and everyone is welcome to come and visit at any time.